New Shipping Container Weight Regulations Put Pressure on Maritime Shippers

Are you a shipper or the owner of any maritime-based logistics company who is looking for a proper way to weigh shipping containers? Due to the SOLAS (Safety of Life at Sea) program, anyone who ships containers or cargo should ensure that his/her cargo is measured properly.

Shipping Container Weight

What Exactly is SOLAS?

SOLAS program will be in effect from 1st July 2016. This program states that “any packed shipping container must be properly verified before it’s loaded onto a vessel”. Therefore, if you don’t verify your containers weight, you will be violating SOLAS terms and conditions. Due to these amendments, shippers have only two acceptable methods to verify their shipping container weights; weighing the cargo and container plus the weight of the container’s tare weight or weighing the container after it has been packed.

SOLAS Requirements

This program doesn’t allow shippers to estimate the weight of their containers. As a shipper, you will be responsible for not only the weighing process but also the contents of your container. The weighing equipment must meet all the certification standards and national calibration.

In addition to meeting all shipping container weight requirements, any shipping documents must be signed by the person who is authorized by the shipper. Once signed, these documents must be submitted to the master or their representative. If there’s no proper way of weighing shipping containers at the marine terminal, signing will not be done hence more time and money will be wasted by weighing the cargo at the port. This is why you need to invest in good weighing systems.

Does SOLAS Effect Shippers & Related Logistics Companies?

Yes it does. First, it will be difficult to pin-point who the exact shipper is. There are numerous parties involved in the entire supply chain. Secondly, it will force shippers to invest in new technology and retrofits that are very costly.

However, this program aims at creating a safe and conducive environment while shipping containers. As a result, shippers are working with companies that produce the proper truck scales and weighing systems to meet these requirements. One provider of on-board weighing systems, Walz Scale, is pushing its on-board telehandler scale  as an optimal weighing solution for shippers.

The Optimal Weighing Solution for Shippers

Shipping Container Weight SOLASOf course there are many weighing systems that can be used on shipping containers. However, few are as efficient (especially at busy ports) as the on-board telehandler scale system.

This on-board weighing scale can efficiently ensure that your shipping containers are properly weighed while being loaded onto ships for transport.

  • High precision – The telehandler scale comes with integral weighing systems that enable uses to install it while at the field and get consistent accurate weights.
  • Very durable – Working conditions at the ports aren’t friendly to any weighing systems. However, this system uses a patented sensor technology that makes it extremely durable and reliable.
  • User friendly interface – The on-board telehandler weighing system comes with an interface that provides operators with all the tools required for an accurate and efficient operation. It was designed to work for 24/7 in very harsh conditions. In addition, its screen is very visible during daytime and nights. This is due to the LCD backlit display feature.
  • State-of-the-art design – This weighing terminal is designed to withstand constant abuse and continuous use without failing. Here, all the credit goes to the internal membranes and a long-lasting keyboard plate.

The Last Word

The SOLAS program is an international treaty signed by 162 states including the USA. It aims at improving safety while ensuring proper shipping container weight limits. By investing in a telehandler, you will not only make your work easier but will also evade any fines arising from shipping container violations.

Continue reading


Best Strapping Machines for Pallets & Large Parcels

When storing or transporting your products, you always want the assurance that the strapping won’t let you down. In a commercial context, it is important to invest in a strapping machine that will provide quality and secure strapping.

There are strapping machines designed to serve various purposes. It is thus advisable to choose a strapping machine that best suits your business and intended strapping operations. Strapping machines not only help you save time but they also play a significant role in increasing productivity. Hence, this write-up is intended to give you the best strapping machines for pallets and large parcels.

StraPack RQ-8Y-PLT Strapping Machine

The StraPack RQ-8Y-PLT is a portable pallet strapping machine which is easy to maintain. It is designed to speed the placement of strap and increase tension around palletized products. It has a high tension operation that provides approximately 980N of tension. This implies that with this strapping machine, be sure to get secure, well-fastened pallets.

Additionally, this StraPack strapping machine uses a single phase power supply. As a result, it has no limitation of the strapping operations. RQ-8Y-PLT uses an advanced slide arch unit that ensures that all strap placements are perfect.

Moreover, it has an extension arch unit that is aimed at providing more possibility of the strapping operation. The StraPack RQ-8Y-PLT is one of the best strapping machines for pallets and large parcels. Find StraPack strapping machines for sale at WalzEQ.com.

Optimax TRS-600 Strapping Machine

Like the latter StraPack strapping machine for sale, Optimax TRS 600 is a heavy duty, fully automatic pallet strapping machine. It is designed for strapping high volumes of packages and cartons.

The Optimax TRS-600 strapping machine requires you to place your parcel under the arch, and at a press of a button, the machine straps the pack automatically. It can strap approximately twenty-seven straps per minute. It provides an efficient solution to almost all your business strapping needs.

Further, the Optimax TRS-600 strapping machine has an external tension control that is designed to prevent misfeeds as well as suit both short feed sensors and suit pack application. Moreover, it comes with an arch size of approximately 850mm x 600mm. Nonetheless, other arch sizes can be availed to you on request but at an extra cost.

TP-202 Strapping Machine

The TP-202 strapping machine is a semi-automatic strapping machine which uses a manual inserting tape. It is a famous and economical strapping machine which is designed to strap any product that you place on the table of the machine. Its motors run only during the strapping cycle. It is a convenient machine that provides the quietest working environment. The TP-202 portable light-weight strapping machine which allows for easy transportation and only requires a little space for installation.

Additionally, the TP-202 Strapping Machine is an inexpensive and reliable strapping machine that beats all other semi-automatic strapping machines. It is designed to allow for electronic control of all extended straps, mechanical control of the tape tension, easy to operate, not limited by frame, stainless steel table, and offered at a fair price. Moreover, it makes use of a self-threading technique that allows it to auto-feed just with the touch of a lever.

The above strapping machines will not only help you to save time but also boost your productivity in the long run. Therefore, with any one of the above strapping machines, be sure of a convenient and reliable strapping operation for your pallets and large parcels.

Continue reading


Cubing & Weighing Systems: Static vs. In-Motion

If you run a logistics warehouse or distribution center, then you know that having the right cubing and weighing system is a critical part of your operation. With new technology always coming on the market there are now many choices for cubing systems and similar dimensioning products. However, you can narrow your search by determining primary type: static cubers or in-motion/dynamic cubing systems.cubing weighing system

You can purchase a static system which resembles a scale of old day, it stays in one place and you must load each parcel onto the system for a weight and dimension measurement. A cubing system that is in-motion is attached to a conveyer belt and measurement occurs as the package passes the sensors. The type of system you use will depend on the type of materials you are shipping. Some businesses may use only one and some may use both. Regardless, they each have their benefits and their drawbacks.

In-motion/Dynamic Cubing Systems

The in-motion type of cubing and weighing system involves sensors placed along conveyer belt systems already in use and measure the package as it goes by the sensor. These systems are very reliable and don’t need a lot of man work to operate. Data is sent directly to operating software for download or evaluation later.dynamic in-motion cubing system

These dynamic cubing systems are definitely more expensive to purchase but operating costs are low. They are best suited for large companies that have already established a conveyer belt system in their warehouse or DC. The automatic cubing and weighing system does the work on its own freeing up employees for other tasks. Further with software support they can be very advantageous in helping you better plan your loads. You will work much more efficiently and productively.

Static Cubing Systems

The static type of cubing and measuring systems are basically a fancy scale that requires employees to place the package on the scale. There are also mobile applications that can be used with a scanner. One simple scan can give your employees all the information they need on the large or odd sized package. For those who use palletized loads there is a static scale that can be used as well. No matter the size or dimension of your packages there is one that will work for you.static cubing system

This type of cubing and measuring system is best used in smaller operations where conveyer belt systems are not used. Additionally, if your company ships mostly small packages this is the perfect solutions as well. Although more labor intensive if you routinely ship large odd shaped packages you know that the tape measure method is often less than effective and also is very time consuming. The point and shoot ability of static systems will save you not only time but money when you are dealing with odd or large packages. Although cheaper to purchase you might have to have several different types to fulfill all the needs of your business.

Cubing and weighing systems can come in two varieties, static and in-motion. Regardless, of whether you operate a logistics warehouse company or supply chain management firm, there a great advantage to using either one. You will save both time and money with the ability to stream line your shipping procedures. Check out the wide selection today and move your business forward tomorrow. Your employees and your customers will thank you.

Continue reading